What size of filter do you need for a 10-gallon tank?

Maintaining good water conditions in a small aquarium isn’t easy, especially if you are owning a small aquarium as 10 gallons tank. When deciding on the best filter for a 10 gallons tank, you must weigh multiple aspects including price, efficiency, type of filtration, and one of the most important factors are is the size of the filter.

While you may hear that oversizing your filter is even better for your tank, but it is not really true for all the case. In this post, I would recommend you the best size of filter for your tank.

#1 The flow rate that the filter provides

Choosing the correct size of filter for your tank is vital as it have to large and power enough to the to work efficiently and keep the water clean and well-oxygenated, and it is also should not too power. The key thing to look for is the flow rate that the filter unit provides.

The flow rate of an aquarium filtration unit or you can know as GPH (gallons per hour) is the amount of gallon of water that are go through the filter’s pump and being filtered in one hour. For a 10 gallons aquarium, I recommend that you should use a filtration unit with a GPH of at least four times your aquarium’s capacity. That means it need a filter with a flow rate of at least 40 gallons per hour.

#2 Can you put an oversize filter in a 10 gallons tank?

Yes, you can. In fact, you probably hear that it is better to put a slightly oversize filter in your tank. It is obvious should if you plan on having fish of any size or more than a couple fish in the aquarium at one time.

However, it is should just slightly larger size than being recommended. You might have to be careful of the flow of water as it exits the filter into the aquarium. Forexample, if you use 200 GPH filter for 10 gallons tank. It is pretty easy to make the water flow so quickly and too powerful that the fish cannot swim as normal. They are constantly swept around the tank and your tank’s decorations and gravel even can get pushed out of the way.

In this case, there is a better option that you can choose the filters have a way to adjust the flow that comes out of the filter. But if your filter does not come with this feature, you can construct baffles in your tank. It will allow the water to flow from the filter but reduce its impact upon the aquarium.

Best Aquarium Air Pumps: Tetra Whisper Air Pump for Deep Water VS. Hydrofarm Active Aqua Air Pump 

An aquarium does not really need air pumps to achieve success, but in order to keep your fish healthy and well-oxygenated, you should combine the best fish tank filters with the best aquarium air pumps.

It is your responsibility to provide the comfort to your fish and the amount of oxygen, which your fish will need as well.

Not only that, but the air pumps also helps replicate the natural habitat for your fish.

But if you have no idea about choosing the best aquarium air pumps, then this post is our two recommend air pumps that you should consider to get: Tetra Whisper Air Pump for Deep Water Applications VS. Hydrofarm Active Aqua Air Pump.

#1 Capability

If you have a large tank, you will need to have stronger or more than one air pumps to meet the tank needs. You should check your tank size rating for the air pump to get the model with proper capability.

However, you also should not get the air pump that is too strong, it definitely can blow your fish in the tank.

Hydrofarm Active Aqua comes in only one size that measures 7″ length x 5.5″ width x 11″ height. However, it offers users for 4 outlet options for your convenience.

From 1 outlet to 8 outlets, you can choose an appropriate capacity model for your aquarium. With the strongest option 8 outlets, 25 liters (6,6 gallons) of water is cycled per minute and 400 gallons per hour.

Tetra Whisper AP series available in two sizes: AP150 can handle for up to 150 gallons and AP 300 can pump gallons of water at 300 gallons.

#2 Efficiency

Tetra Whisper AP series is the UP-listed air pump, which can work well for promoting superior water movement insider the tank even in the deepest area of the tank. It can cause airflow in 8 feet deep. If you own a saltwater aquarium, you can be assured that this air pump still works well in your tank.

Active Aqua offers a pressure control knob on the top of the device, that allows you to control how strongly and the amount of airflow that it pumps into the tank. Although it is little in size, it can pump the water in 3 feet deep of the tank.

#3 Noiseless

Active Aqua includes the multi-level muffler, which will ensure that the device does not make loud and inconvenient noise for users. While Tetra air pump is designed with the rubber feet to stick on the glass of the tank. With this design, the air pump is very good at minimizing sound disturbances.

However, many users complained that after a long time of using, Tetra air pump can still function properly but it becomes noisier.

Best Hot Glue Gun For Woodworking Buying Guide

The best hot glue gun is a device that brings convenience and helps you quickly complete your craft project. It is no exception with woodworking.

You will no longer have to melt the glue yourself to complete your project. With the best hot glue gun for woodworking, you will be able to work more flexibly, safely and quickly.

Currently on the market there are many models of glue gun. The choice will become a lot simpler if you consider some of the following factors before buying.

#1 Wattage

Glue gun usually has a capacity of about 120 Watts and this is a number that can ensure a fast working performance. You can also choose a glue gun with a lower capacity if the demand is not large.

You should also choose devices with an on / off switch. Some products without switches will only increase the risk of accidents and consume more electricity.

An on / off switch will also ensure the glue gun has a break to reduce the temperature when not in use. It will also increase the shelf life of the product.

#2 Mini or Industrial Glue Guns

The choice between mini glue gun or industrial glue gun depends on the needs and scale of your craft project.

Mini glue guns often used with small craft projects. Even children can use it for their creative projects.

An industrial glue gun is more suitable for large craft projects. For those who often use a glue gun, this is a suitable option.

And industrial glue guns are also used by many professional craftsmen. This is an equipment that is not possible for woodworking.

#3 Glue gun Stand

A glue gun is safe to have support for glue gun to stand in the break.

This factor will ensure the user does not burn when the glue gun is at rest. It also helps to extend the life of the product.

#4 Cord

The cord of glue gun should have a good length so that the user can use the device flexibly. If the cord is too short, users will not be able to apply glue to the hard to reach places.

Us seed banks

If you want a very high yield of cannabis with high tetrahydrocannabinol content, you need to find quality seeds. Using cannabis has become one of the best moves. If you grow your own cannabis plant, then you will control everything. To find quality hemp seeds, you need a good US seed bank.

The first step in the marijuana planting adventure is to find the marijuana seeds to be planted and the marijuana equipment to be used to grow weeds. Well, cannabis equipment is not a problem because you can always find some. The vital part is finding the best cannabis seeds. If you want to make cannabis a little sneaky, it’s best to start searching online. Well, if you do this, you may find a lot of cannabis seed banks to choose from, and of course, many cannabis strains to study.Here are tips on how to find the best US seed bank to buy cannabis seeds:

#1 Consider the look of your website

It’s easy to find US seed banks. All you need to do is enter “hemp seed bank,” “buy hemp seeds,” or any other key phrase related to the online cannabis seed store, and Google will find it for you. After presenting the results to you, visit each site, and see what each site looks like. Professional? Is it organized? Does the company spend a lot of money on the design of the seed bank and the entire system? These are just some of the questions you should ask yourself. Although it may not seem like much information about the quality of things, this is the first thing you should check. The idea you might want to keep in mind is that a legitimate seed bank should have a professional website. The site should be easy to use and have good customer service. List your candidates.

#2 Read seed bank reviews

This is the second step in finding the best US seed bank. After categorizing your website by its appearance, you can now read reviews created by cannabis review companies or honest reviews from its previous customers. Remember to focus on the list you just created. Focusing on the list can help you save time.

#3 Read the Seed Bank FAQ

The FAQ or “Frequently Asked Questions” page contains some useful information you can use. You can also contact them directly to check if their customer support representative is really willing to help. If the customer support representative does not respond, leave the seed bank.

#4 Compare with other seed banks

Always compare prices, feedback, and everything about the seed bank in the list until you find the best seed bank.

The tips you read above are just some ways to find the best seed bank. There is still much to do. Initially, buying cannabis seeds can be difficult, but over time this will be a piece of cake for you. Finding the best seed bank is just a problem.

Therefore, you should ensure that you only buy seeds from US seed bank, or you may end up wasting your hard-earned money on fake products. On the other hand, seed bank also retains a pseudonym and sells copies of seeds at a higher price.

How much does it take to build a cheap chicken coop?

As soon as you are keeping a flock, you will need to concern about some matters: how to feed them, what is the best food, how to shelter them, etc. And one of the most important factors should be the chicken coop.

Especially when you are limit on budget and plant to have a cheap chicken coop, the matter will be more difficult but it is not impossible if you read the article below.

Build your own

Not everyone can hire a builder or buying a chicken coop in store, this is also much more expensive than building your own. And if you do not have the self-confidence to make it, you can order a kit, which is ready to assemble. This absolutely saves your money. But nothing better than the best chicken coop plan guide.

Size and your chicken’s space requirement

It probably is obvious that the bigger coop will take more money for material than the smaller ones. The size of the coop depends on how many chickens did you have, how big they are, how many rooms you have.

Although the small coop will take less cost, it is necessary to notice on space requirement of chickens. Each chicken should have at least 4 square feet if they are had a space outside to free-range. But if they are confined they will need at least 10 square feet per chicken. Chickens that live in cramped conditions will be formed anti-social behavior.


The best way to save money and build a cheap chicken coop is to repurpose some previous materials. You can build a chicken coop out of reclaimed wood pallets, this material is very low cost. While hardware cloth made of galvanized steel is durable and more secure, but you can also use chicken wire to cover the enclosure, it will much cheaper.


To saving the cost of build chicken coop, you should add only essential furniture such as feeder and source of water. The other things like plants, décor, lighting, human seating, etc need to be summarised, these things will make you more cost to do.

Things you should know about ball python incubator 

There are many ways to successfully incubate ball python eggs. Breeders can able to hatch eggs by allowing their mother python maternally to incubate their own eggs.

But if you do not have any experience with incubation python ball, you can’t provide the proper humidity and temperature for the eggs. Buying a ball python incubator is the best choice.

Choosing the best reptile incubator for your ball python may be an overwhelming task with so many different kinds of devices are available. But it seems to be easy if you choosing the device base on the temperature and humidity levels that the python eggs request.

 #1 Temperature and humidity

Like the other eggs, python balls will need an incubator that meets the requirements of specific temperature and humidity. Python eggs can’t be hatched successfully by incubators designed for poultry.

Ball python eggs are known as hardy, they can be incubated from temperature ranges from 75 to 95 degrees F. They also request optimal levels of humidity of about 90-100%.

The ideal incubator should resource a natural environment without much difference. This is will directly deeply affect the success of hatching.

 #2 Thermostat accuracy

The accuracy of temperature and humidity is also very important because python is a cool blood animal and they get heat entirely from outside.

If the level of temperature is too low, they can’t incubate. If it is too high, you may cook your ball python eggs. Therefore, your incubator should come with quality thermostat.

#3 Size of Incubator

It is important to choose an incubator that big enough to meets your needs and your criteria. The size of the incubator should be determined by how many ball python eggs that you intended to hatch. It also needs to fit with the space in your home.

What are the common bearded dragon bedding types?

Bearded dragon bedding not only provides a good night’s sleep, a habitat for bearded dragon but also directly determines the health status of the pet.

Bearded dragon bedding is a must in every captive environment, and it requires you to put a lot of effort and attention into it. However, choosing the best substrate for bearded dragons is not a simple job.

First of all, you need to distinguish the most popular bearded dragon bedding types so that you can choose the type that best suits your pet.

Some of the most common types are:

#1 Sand

Sand is one of the most popular options for bearded dragon bedding. However, this type of substrate is quite controversial.

Sand can stimulate bearded dragon’s dug-up behavior and is a warm bed for pets. However, bearded dragons may eat sand due to the habit of adding minerals from the soil when it is still living in the wild.

Currently there are many types of digestive sand, containing calcium has somewhat improved this situation. However, this type of substrate is still not recommended for baby bearded dragons.

#2 Liner

This type of substrate resembles small carpets that simulate grass or sand, it usually serves in a roll and can be cut to any size you want.

Liner usually have a fairly soft texture and you can reuse it after clean. This is the best bearded dragon substrate with a budget choice for you.

#3 Tile

Tile is a durable substrate and provides a clean environment for pets. Tiles are reusable as liner and this is also an economical option for you.

Tile is a good absorbent material so it is ideal for deodorizing bearded dragon’s waste.

#4 Newspaper

The newspaper may absorb well but it is very quick to get wet and smells. This may be a good temporary choice during the time you find a better substrate.

#5 Clay

This is the material that any bearded dragon should experience once. It can create caves and tunnels before drying out and these constructions can last very long.

It is ideal when bearded dragon cannot eat clay after drying.

How to choose the best professional boning knife?

Whether you are a professional chef, a home cook or a person who has a passion for cooking. You all need the best boning knife in your kitchen.

It is an essential addition tool for professional kitchen and for home use.

As a named, boning knives are used to cut around the bone, slice all of the meat and detach bones from meat that more easily than another knife.

A boning knife usually has a sturdy, sharp and narrow blade. But there are so many kinds of boning knives are available on the market that looks pretty much the same, make you difficult while choosing.

Then what you should expect on the best professional boning knife?

You may also like: Best Commercial Butcher Knives.

#1 Material

Material that used to produce the boning knife is the first important thing that you should consider.

Carbon steel is an ideal material for making a boning knife because they are strong and durable. It can use for heavy-duty work and have a long life while always keep perfectly sharpness.

The only weakness of carbon steel is it can corrode and rust over time if not used in the right way.

Stainless steel is better at hardness, doesn’t get much attention on maintenance, won’t be easy to get corroded and rust in comparison with typical carbon steel.

Stainless steel is also lightweight, making it easy to use and handy. But this material may be expensive.

#2 Size

Most of the boning knives have a blade in 5-6 inches long while the others can up to 9 inches. The thickness of the blades affects the thickness of the meat you want to slice.

Each size of knives is allowed the different purposes of using. But a lightweight boning knife will help you more easy to handle and flexible than heavy ones.

>Read more:

Best Commercial Knife Sharpener.

Best Commercial Food Storage Containers.